Wednesday, November 12, 2014
Recipe - Stuffed Backstrap
Take a backstrap and cut it almost all the way through the side like a hotdog bun. Pound out the meat a little to make it more of a uniform thickness. Place cream cheese and jalapenos in the middle and fold back over. Sprinkle some seasoning on the meat and top it with bacon. Roast in the oven at 350 for about 30 min or until the internal temp is 140. Turn the broiler on low to crisp up the bacon for about 10 minutes and pull out of the oven when the internal temp reaches 160.
Monday, November 10, 2014
Story - My First Deer
I didn't really grow up hunting. My dad took me shooting a lot, but we only really hunted squirrels a few times when I was younger. Dad still gets grossed out by touching fish and guts. When I got my drivers license at 16, my friend Michael and I would go dove, rabbit and squirrel hunting. It wasn't until I moved to Arkansas and lived out of town that I started deer hunting. My roommate and I started seeing deer around the house so we went and bought a couple cheap bows to practice with. We went out behind the house and made some treestands out of milk crates and forklift pallets. The first evening we actually hunted I had a doe come in about 20 yards and I shot right below her. She came back about 5 minutes later to the same spot and I put one right through the heart. She ran off about 50 yards and died. We had no idea what we were doing, so we left the guts in, tied her legs to a log, and carried her back to the house. We had Papa come guide us through the cleaning process. He hung her up by the neck, stuck a 6" fillet knife straight through the chest, and ripped straight down all the way to the bottom. That deer was probably the worst tasting meat I had ever eaten. About 30 deer later I am finally getting it right. It's amazing how experience has changed the process in which we do all our deer cleaning now.
The main things I did inefficiently were:
Field dressing at the house instead of on site
Carrying instead of dragging
Cutting straight through all the organs instead of cutting the skin and pulling the organs out
Laying the deer on a table and cutting off every piece of meat instead of quartering
Wrapping in butcher paper instead of vacuum sealing.
Tuesday, October 28, 2014
Story - Spring 2012 Crappie
This was the first year we actually caught crappie at Beaver Lake. It lasted about two weeks before the flood came. If the fish are biting you had better go, because it wont last long.
Wednesday, June 11, 2014
06/10/14 Fishing Report
Lake: Beaver
Location: Highway 12
Time: 5:00PM-9:00PM
Air temp: 60 degrees
Water temp: 76 degrees
Clarity: Clear
Visibility: 5'
Wind: NW 15
Sky: overcast
Winning tactic: Jigging brushpiles in 25' of water.
Catch: 7 crappie, 4 whites, 2 bluegill
We started out trolling and picked up a few here and there. We couldn't get anything consistent. The deep brushpiles were holding a few fish so we threw out the markers, anchored up, and jigged them. The shad colored jigs weren't doing very well, I guess because the wind and clouds, so we switched to yellow and green on a 1/8oz jighead and started reeling in the crappie. I guess we need to check the brushpiles more, because it was a lot more productive than trolling tonight.
Location: Highway 12
Time: 5:00PM-9:00PM
Air temp: 60 degrees
Water temp: 76 degrees
Clarity: Clear
Visibility: 5'
Wind: NW 15
Sky: overcast
Winning tactic: Jigging brushpiles in 25' of water.
Catch: 7 crappie, 4 whites, 2 bluegill
We started out trolling and picked up a few here and there. We couldn't get anything consistent. The deep brushpiles were holding a few fish so we threw out the markers, anchored up, and jigged them. The shad colored jigs weren't doing very well, I guess because the wind and clouds, so we switched to yellow and green on a 1/8oz jighead and started reeling in the crappie. I guess we need to check the brushpiles more, because it was a lot more productive than trolling tonight.
| We should have gotten ice before we went. Robert thought it would jinx us. |
![]() |
| This roadbed had fish on it the first time we went over it, but they had moved the second time around. |
![]() |
| Finally found a brush pile I had heard about for the last 10 years. |
![]() |
| This was crossing over the roadbed at an angle. |
![]() |
| This was going down the road bed, you can see where the old creek channel was on the side. |
![]() |
| This was the main brushpile we caught the crappie from. |
Monday, June 9, 2014
05/1714-06/07/14 Fishing Report
Lake: Beaver
Location: Highway 12 - Monte Ne
Time: Misc
Air temp: 60-80 degrees
Water temp: 68-80 degrees
Clarity: Clear.
Visibility: 3'-5'
Wind: NSEW 0-30
Sky: Clear-Rain
Winning tactic: Trolling crankbaits 10' deep in 15'-30' of water.
Catch: walleye, crappie, whites, catfish, carp, gar
This is just going to be a mass update for the last month. Highway 12 has been pretty steady in producing fish. Monte Ne and Horseshoe bend have seemed to dry up. Night fishing under lights is not happening this year. We have caught no shad or fish in the 4 trips we have taken. Bowfishing has been good, but only on windless nights near the main channel. Trotlines on dead shad have been good in 1'-5' of water. Trolling flicker shad and 1/16oz jigs seem to be the most consistent.
Location: Highway 12 - Monte Ne
Time: Misc
Air temp: 60-80 degrees
Water temp: 68-80 degrees
Clarity: Clear.
Visibility: 3'-5'
Wind: NSEW 0-30
Sky: Clear-Rain
Winning tactic: Trolling crankbaits 10' deep in 15'-30' of water.
Catch: walleye, crappie, whites, catfish, carp, gar
This is just going to be a mass update for the last month. Highway 12 has been pretty steady in producing fish. Monte Ne and Horseshoe bend have seemed to dry up. Night fishing under lights is not happening this year. We have caught no shad or fish in the 4 trips we have taken. Bowfishing has been good, but only on windless nights near the main channel. Trotlines on dead shad have been good in 1'-5' of water. Trolling flicker shad and 1/16oz jigs seem to be the most consistent.
| We saw a pelican at horseshoe bend. He must have been lost. |
| Roberts first fish with a bow. |
| My first fish with a bow. |
| Trotline while we bowfished. |
| Robert and Brent hit the same fish. |
| Flathead from the trotline. |
| Test run of the LED rope lights for bowfishing. |
| Raised platform and bow holder really help out. |
| First fish on a homemade jig. |
| All the whites recently have been tiny. |
| Caught a few baby walleyes and this keeper on a flicker shad in about 15 FOW. |
| Enough for lunch the next day. |
| Walleye vs Crappie fillet. |
| Billy's state record crappie. |
| First fish on a homemade bucktail. |
Monday, May 12, 2014
Rebates - Redfield Battlezone and Flicker Shad
I will start off by saying that I chose these products based on the quality and their anticipated use. They just happened to have rebates available. I wouldn't buy something that had a rebate and try to find a use for it in the future to justify it.
Redfield Battlezone
I found a scope that I wanted for my 308 at Cabelas, but it was $199 plus tax. When I got home, I started searching for the same one online. I found it at Black Bear Sporting Goods for $132+$10 S&H. I also found a rebate at Redfield for $45.
http://www.redfield.com/wp-content/uploads/2014/04/Battlezone_rebate_pad_April_June_2014_45_back.pdf
Total cost $97.
Flicker Shad
These baits are another instance of "You get what you pay for". We have caught a lot more fish since we started trolling with these. Crankbaits are expensive, but trolling open water you are not very likely to loose them, especially with 20lb braid. I found the rebates online before I actually went to the store. Miranda actually pointed out the sign to me. It was right in front of my face and I never saw it. The math is listed below.
11 cranks = $48
http://www.cabelas.com/product/Berkleyreg-Flicker-Shad/1416025.uts?Ntk=AllProducts&searchPath=%2Fcatalog%2Fsearch.cmd%3Fform_state%3DsearchForm%26N%3D0%26fsch%3Dtrue%26Ntk%3DAllProducts%26Ntt%3Dflicker%26WTz_l%3DHeader%253BSearch-All%2BProducts%26x%3D0%26y%3D0&Ntt=flicker&WTz_l=Header%3BSearch-All+Products
Rebate - $15 off $40 = $33
http://www.cabelas.com/assets/pdfs/berkley_buildown_15rebate_6-30-14.pdf
Rebate - Free braided line +S&H = $19
http://www.cabelas.com/assets/pdfs/free_berkley_fireline_5-31-14.pdf
Total = $1.75 each
Redfield Battlezone
I found a scope that I wanted for my 308 at Cabelas, but it was $199 plus tax. When I got home, I started searching for the same one online. I found it at Black Bear Sporting Goods for $132+$10 S&H. I also found a rebate at Redfield for $45.
http://www.redfield.com/wp-content/uploads/2014/04/Battlezone_rebate_pad_April_June_2014_45_back.pdf
Total cost $97.
Flicker Shad
These baits are another instance of "You get what you pay for". We have caught a lot more fish since we started trolling with these. Crankbaits are expensive, but trolling open water you are not very likely to loose them, especially with 20lb braid. I found the rebates online before I actually went to the store. Miranda actually pointed out the sign to me. It was right in front of my face and I never saw it. The math is listed below.
11 cranks = $48
http://www.cabelas.com/product/Berkleyreg-Flicker-Shad/1416025.uts?Ntk=AllProducts&searchPath=%2Fcatalog%2Fsearch.cmd%3Fform_state%3DsearchForm%26N%3D0%26fsch%3Dtrue%26Ntk%3DAllProducts%26Ntt%3Dflicker%26WTz_l%3DHeader%253BSearch-All%2BProducts%26x%3D0%26y%3D0&Ntt=flicker&WTz_l=Header%3BSearch-All+Products
Rebate - $15 off $40 = $33
http://www.cabelas.com/assets/pdfs/berkley_buildown_15rebate_6-30-14.pdf
Rebate - Free braided line +S&H = $19
http://www.cabelas.com/assets/pdfs/free_berkley_fireline_5-31-14.pdf
Total = $1.75 each
| I didn't get a picture of the other rebate sign. There are forms on the back side. |
| 3.99 is still cheaper than the Rapalas. |
| I can already taste the fish. |
| I had accumulated a few crankbaits, but nothing that dives over 8'. |
How To - Making Bucktail Jigs
So, I like to hand make things to harvest critters. With the cost of time it would be much cheaper to buy a few bucktails. But, I buy bucktail jigs and throw out all the hides we get in the fall. It seems like a no brainer. The only thing I didn't have was the thread bobbin. I tried a couple variations and used pipe cleaner for accent. I think what I am going to do next time is use red thread with clear polish. Also the thread spool I was using was too big for the bobbin and the thread was too thick.
Process:
Clamp the jig head down.
Make a few wraps to get the string locked down.
Put a little fur on the top and make a few wraps.
Put a little fur on the left and make a few wraps.
Put a little fur on the right and make a few wraps.
Finish it off.
Put a little nail polish on it to lock the threads down.
Process:
Clamp the jig head down.
Make a few wraps to get the string locked down.
Put a little fur on the top and make a few wraps.
Put a little fur on the left and make a few wraps.
Put a little fur on the right and make a few wraps.
Finish it off.
Put a little nail polish on it to lock the threads down.
| Bucktail, pipe cleaner, jigheads, nail polish, thread, and bobbin. |
| My oldschool jig clamp. |
| Not bad for a first run. |
| A couple variations. Also, I think pool noodles are about as versatile as PVC. |
| First fish on my homemade jig. |
Subscribe to:
Posts (Atom)
















