Wednesday, June 11, 2014

06/10/14 Fishing Report

Lake: Beaver
Location: Highway 12
Time: 5:00PM-9:00PM
Air temp: 60 degrees
Water temp: 76 degrees
Clarity: Clear
Visibility: 5'
Wind: NW 15
Sky: overcast
Winning tactic: Jigging brushpiles in 25' of water.
Catch: 7 crappie, 4 whites, 2 bluegill

We started out trolling and picked up a few here and there. We couldn't get anything consistent. The deep brushpiles were holding a few fish so we threw out the markers, anchored up, and jigged them. The shad colored jigs weren't doing very well, I guess because the wind and clouds, so we switched to yellow and green on a 1/8oz jighead and started reeling in the crappie. I guess we need to check the brushpiles more, because it was a lot more productive than trolling tonight.


We should have gotten ice before we went. Robert thought it would jinx us.

This roadbed had fish on it the first time we went over it, but they had moved the second time around.


Finally found a brush pile I had heard about for the last 10 years.

This was crossing over the roadbed at an angle.

This was going down the road bed, you can see where the old creek channel was on the side.

This was the main brushpile we caught the crappie from.

We trolled about 5 miles with 4 lines out at 10' deep in 4 hours. That is about the equivalent of 2,400 individual 50' casts of which the bait is only at the right depth for about 60% of the time which would take about 40 hours to complete at 1 minute each.

Monday, June 9, 2014

05/1714-06/07/14 Fishing Report

Lake: Beaver
Location: Highway 12 - Monte Ne
Time: Misc
Air temp: 60-80 degrees
Water temp: 68-80 degrees
Clarity: Clear.
Visibility: 3'-5'
Wind: NSEW 0-30
Sky: Clear-Rain
Winning tactic: Trolling crankbaits 10' deep in 15'-30' of water.
Catch: walleye, crappie, whites, catfish, carp, gar

 This is just going to be a mass update for the last month. Highway 12 has been pretty steady in producing fish. Monte Ne and Horseshoe bend have seemed to dry up. Night fishing under lights is not happening this year. We have caught no shad or fish in the 4 trips we have taken. Bowfishing has been good, but only on windless nights near the main channel. Trotlines on dead shad have been good in 1'-5' of water. Trolling flicker shad and 1/16oz jigs seem to be the most consistent.

We saw a pelican at horseshoe bend. He must have been lost.

Roberts first fish with a bow.

My first fish with a bow.

Trotline while we bowfished.

Robert and Brent hit the same fish.

Flathead from the trotline.

Test run of the LED rope lights for bowfishing.

Raised platform and bow holder really help out.

First fish on a homemade jig.

All the whites recently have been tiny.

Caught a few baby walleyes and this keeper on a flicker shad in about 15 FOW.

Enough for lunch the next day.

Walleye vs Crappie fillet.

Billy's state record crappie.

First fish on a homemade bucktail.

Monday, May 12, 2014

Rebates - Redfield Battlezone and Flicker Shad

I will start off by saying that I chose these products based on the quality and their anticipated use. They just happened to have rebates available.  I wouldn't buy something that had a rebate and try to find a use for it in the future to justify it.

Redfield Battlezone
I found a scope that I wanted for my 308 at Cabelas, but it was $199 plus tax. When I got home, I started searching for the same one online. I found it at Black Bear Sporting Goods for $132+$10 S&H. I also found a rebate at Redfield for $45.
http://www.redfield.com/wp-content/uploads/2014/04/Battlezone_rebate_pad_April_June_2014_45_back.pdf

Total cost $97.



Flicker Shad
These baits are another instance of "You get what you pay for". We have caught a lot more fish since we started trolling with these. Crankbaits are expensive, but trolling open water you are not very likely to loose them, especially with 20lb braid. I found the rebates online before I actually went to the store. Miranda actually pointed out the sign to me. It was right in front of my face and I never saw it. The math is listed below.

11 cranks = $48
http://www.cabelas.com/product/Berkleyreg-Flicker-Shad/1416025.uts?Ntk=AllProducts&searchPath=%2Fcatalog%2Fsearch.cmd%3Fform_state%3DsearchForm%26N%3D0%26fsch%3Dtrue%26Ntk%3DAllProducts%26Ntt%3Dflicker%26WTz_l%3DHeader%253BSearch-All%2BProducts%26x%3D0%26y%3D0&Ntt=flicker&WTz_l=Header%3BSearch-All+Products

Rebate - $15 off $40 = $33
http://www.cabelas.com/assets/pdfs/berkley_buildown_15rebate_6-30-14.pdf

Rebate - Free braided line +S&H = $19
http://www.cabelas.com/assets/pdfs/free_berkley_fireline_5-31-14.pdf

Total = $1.75 each



I didn't get a picture of the other rebate sign. There are forms on the back side.

3.99 is still cheaper than the Rapalas.

I can already taste the fish.

I had accumulated a few crankbaits, but nothing that dives over 8'.

How To - Making Bucktail Jigs

So, I like to hand make things to harvest critters. With the cost of time it would be much cheaper to buy a few bucktails. But, I buy bucktail jigs and throw out all the hides we get in the fall. It seems like a no brainer. The only thing I didn't have was the thread bobbin. I tried a couple variations and used pipe cleaner for accent. I think what I am going to do next time is use red thread with clear polish. Also the thread spool I was using was too big for the bobbin and the thread was too thick.

Process:
Clamp the jig head down.
Make a few wraps to get the string locked down.
Put a little fur on the top and make a few wraps.
Put a little fur on the left and make a few wraps.
Put a little fur on the right and make a few wraps.
Finish it off.
Put a little nail polish on it to lock the threads down.

Bucktail, pipe cleaner, jigheads, nail polish, thread, and bobbin.

My oldschool jig clamp.

Not bad for a first run.

A couple variations. Also, I think pool noodles are about as versatile as PVC.
First fish on my homemade jig.






Story - Outboard Blown Head Gasket

I haven't been able to get this motor to run perfect since I got it 3 years ago. It seems like I change something every time we go out. Over the last year I fixed several things. It would never idle, so I cleaned the carb. That worked. The main problem I have is that it sputters for a bit and then runs great for a bit. There is no consistency. I thought it might be getting hot, so I checked the impeller and it was good.  I checked the thermostat and it had chunks of rubber clogging it up. I think the impeller crumbled and was replaced before I bought it, but they didn't check the thermostat to see where the rest of the impeller had gone. I can't find any spark plugs around here, so I cleaned the ones that were in there. I changed the oil a couple weeks ago and it looked fine.

Yesterday I took the spark plugs out to check them. The top one looked great. The bottom one looked like it had water on it. I checked the oil and it was super milky. I drained it and it looked like cappuccino. I figured it was a blown head gasket, so I started breaking the motor apart. Boom, found it. I ordered another one for $38 and I am hoping that this was the root of all my problems. I think what was happening, was when the thermostat opened it was pumping water into the bottom cylinder. I think that was why it was hit and miss. The good thing is that these motors are relatively easy to work on.



Clogged thermostat.

Bits of old impeller.

Milk in the fuel pump hole.

More milk.

Busted. Literally.


Saturday, May 10, 2014

Story - Fishing Report 05/10/14

Lake: Beaver
Location: Horseshoe Bend
Time: 3:30AM-12:00PM
Air temp: 60-80 degrees
Water temp: 68 degrees
Clarity: Clear.
Visibility: 5'
Wind: SW 0-10
Sky: Clear
Winning tactic: Trolling crankbaits 10' deep in 25' of water.
Catch: 2 walleye, 4 crappie, 4 whites, 1 striper, 1 bluegill


After catching some whites that were chasing bait up on a flat at hwy 12 a couple days ago, it reminded me of the time we caught a ton of whites on the flat at horseshoe. We decided to try night fishing with lights in the channel and checking out the flat when the sun came up. I checked the moon phase and we had a 3/4 moon that was setting at 3:09AM. We believe that the lights night fishing can't compete with the moonlight, the darker the better. We decided to get out after the moon set instead of going out at dusk and waiting out the morning. The water was so calm when we got there. I was laying in the floor eating a McDouble as we motored out and it just seemed like we were just sitting still with the motor revved up. The lights worked great and we had a few shad, but the fish never really went crazy. The bites we did get were very light. We only caught a couple fish before day broke. We decided to abandon the night fishing an started trolling. We saw most of the fish suspended in about 15'-35 of water. We trolled 4 flicker shad #7 in variuos colors about 150' behind the boat at about 1.5-2 mph. We caught the walleye out of big schools of fish. It's cool to see the fish on the depthfinder and then catch one when the lure passes through. After the fog broke and the sun got a bit higher, the schools dispersed. We need to figure out where all the fish went after they moved out of the shallows. We couldn't find anymore fish, so we decided to head back to the truck and get the bowfishing rig. I saw a couple carp, but the wind was making the water too choppy to see through. Overall we should have just fished from about 6-8 then bowfished until the wind picked up.


 
 


The moon was a lot brighter than this pic looks.
Light going full blast.


You could only see about 50 yards. It was kinda creepy.
Fish chasing bait.

School of fish.


The first walleye of the day.
The fog breaking.

I don't know what he planned on doing with that crankbait.

This was the highlight of our day.

Never get hungry or cold when hunting or fishing. It just gives you an excuse to go home. When you get home you will wish you were still out there.

A foam noodle protector for the lights.

These things snag everything when they are not in use. This keeps them contained so the hooks aren't flopping everywhere.
Foam noodle to keep the bottom bouncers organized.

Finish the fishing trip with deer steaks and homemade rolls. Done.